Image
Product code
Description
Manufacturer
Manufacturer code
Stock
Price
QTY
Motor Controller RC, two channels
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC-10A/250VAC;
Bandwidth /Hz/: 430MHz;
Code type: Fixed;
Number of RC (same code): unlimited;
Number of RC (different codes): 30;
71.43 KB
5
pc
| 1+ | 45.70 BGN |
| 3+ | 42.00 BGN |
| 5+ | 38.80 BGN |
| 10+ | 36.10 BGN |
| view more | |
> 20
pc
| 1+ | 21.80 BGN |
| 5+ | 19.90 BGN |
| 10+ | 18.30 BGN |
| 20+ | 17.00 BGN |
| view more | |
14
pc
| 1+ | 24.50 BGN |
| 5+ | 22.40 BGN |
| 10+ | 20.70 BGN |
| 20+ | 19.20 BGN |
| view more | |
> 20
pc
| 1+ | 25.40 BGN |
| 5+ | 23.40 BGN |
| 10+ | 21.70 BGN |
| 20+ | 20.30 BGN |
| view more | |
> 20
pc
| 1+ | 25.40 BGN |
| 5+ | 23.40 BGN |
| 10+ | 21.70 BGN |
| 20+ | 20.30 BGN |
| view more | |
> 20
pc
| 1+ | 21.80 BGN |
| 5+ | 19.90 BGN |
| 10+ | 18.30 BGN |
| 20+ | 17.00 BGN |
| view more | |
> 20
pc
| 1+ | 24.50 BGN |
| 5+ | 22.40 BGN |
| 10+ | 20.70 BGN |
| 20+ | 19.20 BGN |
| view more | |
8
pc
| 1+ | 3.80 BGN |
| 5+ | 3.39 BGN |
| 10+ | 3.04 BGN |
| 20+ | 2.75 BGN |
| view more | |
6
pc
| 1+ | 7.20 BGN |
| 5+ | 6.55 BGN |
| 10+ | 6.00 BGN |
| 20+ | 5.53 BGN |
| view more | |
Touch Infrared Switch YK-SS004, 12VDC 60W
Description: Infrared contactless switch ON/OFF YK-SS004 for installation in profiles for LED strips. The sensor turns the light on when a hand passes near it and turns the light off when a hand passes it again. For the sensor to work, the profile diffuser must NOT be cut into its area. Connections to the power supply and the LED strip are made by soldering the wires in the places indicated on the device. Input voltage: 12VDC Maximum current: 5A Maximum switched power: 60W Maximum reach: 80mm Detection angle: 110° Dimensions:
213.12 KB
SIRIUS PCB
11020039
15
pc
| 1+ | 13.20 BGN |
| 3+ | 12.45 BGN |
| 5+ | 11.85 BGN |
| 10+ | 11.34 BGN |
| view more | |
408PT
0
pc
| 1+ | 23.90 BGN |
| 5+ | 21.90 BGN |
| 10+ | 20.20 BGN |
| 20+ | 18.70 BGN |
| view more | |
408PT SAW
3
pc
| 1+ | 23.90 BGN |
| 5+ | 21.90 BGN |
| 10+ | 20.20 BGN |
| 20+ | 18.70 BGN |
| view more | |
Step Control Controller
Application: The controller is designed for cascade control of heating, air conditioning and other installations built with more than one unit. In heating or cooling mode, the controller monitors the measured and set temperature and, according to the set parameters, turns on or off a certain number of units to maintain the set temperature. For a uniform load, it is planned to change the order of turning on and off the stages according to “FIFO” logic. Technical data: Supply voltage: 230V/50Hz Outputs for step control: 6 (230V/50Hz) START / STOP input for remote control Input for safety thermostat Temperature sensors: 2 х Pt 1000 (-50 to +250 °С) Measurement range: -30 +130 °С Unit of measurement: 1 °С Custom LED indication Ambient temperature: 5 to 40°С Relative humidity of environment: up to 80% Degree of protection:
680.47 KB
INTIEL
CAd
3
pc
| 1+ | 375.00 BGN |
Save energy relay RM1
Application: Safe Energy Relay provides reasonable usage of heating/air-conditioning energy necessary to reach comfort indoor temperature. The devise directly controls the operation of fan-coils and air-conditioning systems in relation to doors and windows positions and subsequent sudden temperature changing during their opening, under the influence of the environment
494.86 KB
INTIEL
INT0060A
0
pc
| 1+ | 35.40 BGN |
Save energy relay RM2
Application: Safe Energy Relay provides reasonable usage of heating/air-conditioning energy necessary to reach comfort indoor temperature. The devise directly controls the operation of fan-coils and air-conditioning systems in relation to doors and windows positions and subsequent sudden temperature changing during their opening, under the influence of the environment
494.86 KB
INTIEL
INT0060C
0
pc
| 1+ | 37.20 BGN |
Heating circuits controller INT0129
Application: The device is designed to control motor actuators of mixed valves, in accordance with the water temperature directed to the heating system. It can be used also to keep the temperature in buffers or water tanks heated by a boiler by means of a mixed valve. Technical data: The heating water assignation is able to be adjusted in one of the following ways: independently (manually by the controller), by means of outdoor temperature or room thermo regulator Suitable room thermo regulator are contatct or analogue ones, as the analogue output can be 0(4) – 20 mA or 0 – 10V Suitable motor actuators are two way or proportional ones with a control signal of 0 – 10V The following limitations are to be fixed concerning the heating water: Minimum temperature; Maximum temperature; Minimum return water temperature Pump operation: if the heating water is within the fixed range for the minimum and maximum temperature operation by force in case the heating water temperature is less than 10 °С provide an overheating function of the circuit in case the heating water temperature exceeds its assigned level with 10 °С stops the circulation pump in case the temperature of the heating water is less than its minimum assigned level for period of 1 hour. After that the controller goes into test mode in which it starts the circulation pump for 5 minutes every 15 minutes. This mode continues until the heating water exceeds the assignation about its minimum temperature. Equipped with three temperature sensors
719.53 KB
INTIEL
INT0129
3
pc
| 1+ | 348.00 BGN |
Controller for accumulation tanks
Application: The controller is designed to manage the heating of an accumulating tank in a central heating system, thus providing a smooth operation of the boiler, decreasing the number of its starts and stops. It manages directly the operation of a circulation pump between the boiler and the accumulation tank, as well it sends a signal for a boiler start and stop, and measures the temperatures at the top and lower part of the accumulation tank. Technical data: Manage operation of the circulation pump between the boiler and the accumulation tank Sends a signal for start and stop at the boiler Equipped with two temperature sensors Pt1000 (-50° up to +200°C) Monitoring of the following parameters: set and actual temperature at the top of the buffer. set and actual temperature at the bottom of the buffer. Temperature range of regulation from 0 °C up to 100 °C. Outputs – two relay / nominal current – 3A/~250V. output pump ~ 220V/50Hz output for start and stop the boiler Digital settings of main operation parameters. Possibility to lock the settings menu. Custom LED indication. “STOP”
754.79 KB
INTIEL
INT0129-2
3
pc
| 1+ | 223.00 BGN |
Four channel controller for mixing valves INT0129-4
Application: The device is designed to control motor actuators for mixing valves, according to temperature, which is supplied to the rooms build by the mixing circuit. It is possible to control three two-position motor actuator and one analog motor actuator from 0 to 10 V. Suitable for buildings where there are one to four heating circuits , like: underfloor heating, radiator heating and prepare domestic hot water. Technical data: The heating water assignation is able to be adjusted in one of the following ways: independently (manually by the controller), by means of outdoor temperature or room thermo regulator. Room thermostats have to a contact output. Control four heatings circuit : three two-position motor actuators; one proportional motor actuator with analog output 0 – 10 V; The following limitations are to be fixed concerning the heating water: Minimum temperature; Maximum temperature; Minimum return water temperature Pump operation: if the heating water is within the fixed range for the minimum and maximum temperature operation by force in case the heating water temperature is less than 10 °С provide an overheating function of the circuit in case the heating water temperature exceeds its assigned level with 10 °С stops the circulation pump in case the temperature of the heating water is less than its minimum assigned level for period of 1 hour. After that the controller goes into test mode in which it starts the circulation pump for 5 minutes every 15 minutes. This mode continues until the heating water exceeds the assignation about its minimum temperature. Built-in weekly programmer. Equipped with six temperature sensors
605.17 KB
INTIEL
INT0129-4
3
pc
| 1+ | 520.00 BGN |
Dynamic boiler controller
Application: The Dynamic Boiler Controller is very suitable for water heating installations in family houses, small and large projects. It is designed to provide the desired heating comfort, optimizing the fuel consumption by a control of the boiler operation. In fact it is able to manage the operation of solid fuel, light fuel and gas boilers and as well the consumption of a heating energy from accumulating reservoirs or other central heating sources. Technical data: Controls the operation of solid fuel, light fuel or gas boilers. Can regulate the operation of the heating system in relation to the internal temperature of the heating system. Controls the heating system in compliance with: the outlet boiler temperature; the inlet boiler temperature of the return water; the water temperature in the heating circuit after the mixed four-way valve; the temperature in the domestic hot water circuit; the outdoor temperature; the room temperature by a room thermostats. Stops the boiler operation by a signal from the built-in working boiler thermostat, when the maximum working temperature exceeds (+75 °C)-(+90 °C). Opens the mixed four way valve, starts the circulation pump and stops the boiler if the outgoing boiler temperature exceeds its factory settings of (+95 °C)-(+105 °C). Closes the mixed four way valve and start the boiler operation by force (only in winter regime) if the return boiler water is lower than the fixed one of (+45 °C)-(+65 °C). Opens the mixed four way valve and starts by force the boiler operation if the water temperature after the mixed valve is lower than the adjusted one. The operation threshold will be changed automatically by the outdoor temperature and outdoor thermostat. If a room thermostat is not mounted this function can be used for a central equithermal temperature regulation of the water heating in multi-circuit systems and large projects. Opens the mixed valve, starts the circulation pump and stops the
1.1 MB
INTIEL
INT0135
3
pc
| 1+ | 695.00 BGN |
Solid fuel boiler controller
Application: The Device is designed to manage the operation of solid fuel boilers, equipped with a fan and or auger for force feeding of air to the burning chamber. The main principle of operation is based on the regulation of feed air, by means of regulation of fresh air fan speed in relation to outlet boiler water temperature, the state of the room thermostat and the temperature of flue gas fan in case it is installed.There are also output for the management of auger for fuel supply, which is controlled by timer with set times for work and pause. The fans and auger operate in case of closed contact of the room thermostat (need for heating). Technical data: Power supply 230V/50Hz/AC Four relay outputs for fans, pump and auger Two contact switch inputs for blocking thermostat and room thermostat Equipped with two Sensors type Pt1000 Range of measurement from -30° to +300°C Three positional digital indication Possibility for emergency stopping / starting the
575.33 KB
INTIEL
INT0143
3
pc
| 1+ | 352.00 BGN |
INTIEL
INT0159
3
pc
| 1+ | 310.00 BGN |
Pellet burner and pellet boiler cotroller INT0173
Application: The controller is designed to provide automatic control of combustion process and power regulation of pellet burners, boilers and fireplaces. It is possible to attach to the controller additional modules of the series “Expansion modules for pellet boilers” according to the heating system: – Module for control of two heating circuits and DHW – Module for control of buffer and DHW. Convenient user interface via color touch screen. The controller can control the following units from the pellet burner system: – fuel supply auger 1 – fuel supply auger 2 – fresh air fan and flue gas fan – electric heater to ignite the pellets – cleaner to clean the ash – circulation pump – expansion modules for pellet boilers – lock menu against accidental access Protection: – protection against freezing of water – protection against overheating of the boiler and “back fire” – protection against blockage of the circulation pump Technical data: Power supply voltage: ~230V(+/- 10%)/50-60Hz Lighter outlet: ~230V/2KW Outlet circulating pump: ~230V/0.35KW Outlets for fans: 2 pieces х ~230V/0.25kW Output of augers: 2 pieces х ~230V/0.25kW Output cleaner / tubus: ~230V/0.25KW Sensor heating water: Pt1000 (form -50° up to +250°C) Flue gas sensor: Pt1000 (from -50° up to +250°C) Flame sensor: photoresistor Room thermostat input: independent contact Blocking thermostat input: independent contact Flow / rev. sensor input: independent contact / Hall sensor Display: color LCD with resolution 320 х 240 pixels Measuring range temperature: from -50 up to +350 °С Unit of measurement: 1°C Humidity of the environment: 0 – 80% Degree of protection: IP
773.65 KB
INTIEL
INT0173
3
pc
| 1+ | 418.00 BGN |
Control Box M1
Application: The distribution bus is intended for use in control boxes for controlling heating systems, by facilitating the connection of electric actuators and similar control devices, such as different types of room thermostats, controllers, etc. It is particularly suitable for controlling underfloor heating circuits. Through the distribution bus, it is possible to control a circulation pump, a heating boiler, up to 9 heating circuits. Two valve actuators can be connected to each circuit. Each of the two modules can work independently. Technical data: Supply voltage: 230V/50Hz Inputs for control devices: 9 Outputs for use of actuators for valves: 9 (230V/50Hz) Output for circulation pump: 230V/50Hz Boiler control output: independent contact (NO/NC) LED status indication for outputs Ambient temperature: 5 to 40°С Relative humidity of environment: up to 80% СDegree of protection:
935.4 KB
INTIEL
M1
3
pc
| 1+ | 185.00 BGN |
Motor Controller RC, one channel, hopping code
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC-10A/250VAC;
Bandwidth /Hz/: 430MHz;
Code type: hoping code;
Number of RC (memory capacity): 24;
84.58 KB
M1 HC6 xxx 301
5
pc
| 1+ | 57.00 BGN |
| 3+ | 52.30 BGN |
| 5+ | 48.40 BGN |
| 10+ | 45.00 BGN |
| view more | |
Motor Controller RC, one channel
Operating Voltage: 10~16VDC;
Output Current: 15A/24VDC/120VAC-10A/250VAC;
Bandwidth /Hz/: 430MHz;
Code type: Fixed;
Number of RC (same code): unlimited;
Number of RC (different codes): 30;
85.37 KB
M1 LF6 xxx PT
4
pc
| 1+ | 43.90 BGN |
| 3+ | 40.20 BGN |
| 5+ | 37.10 BGN |
| 10+ | 34.50 BGN |
| view more | |
0700 18 880
Copyright 2004-2024, Panda III Co., Ltd. All rights reserverd.